In need of accessories for your Moisture Meter? What type of meter do you own?
Our Moisture Meter Accessories range consists of:
MOISTURE METER ACCESSORIES
- Protimeter Mini / Digital Mini / Surveymaster accessories
- Protimeter Hygromaster accessories
- Protimeter MMS accessories
- Protimeter Grainmaster i2 accessories
- Protimeter Hay & Straw accessories
- Hay / Silage accessories
- Leather accessories
- Paper accessories
- Hops accessories
- Wireless Sensor – Ambient only
- Slim Wireless Sensor
- PT 100 Wireless Sensor
- High Power Wireless Sensor
- WME Sensor
- Inwall Probe (for Hygronet Wireless Sensors)
- Inwall Probe (for Hygronet Base Station)
Protimeter accessories
Protimeter Mini / Digital Mini / Surveymaster
(BLD5055) Heavy Duty Protimeter Hammer Electrode:
A heavy duty hammer electrode for measuring sub-surface moisture levels in wood.
(BLD5070) EIFS Probe:
The Protimeter EIFS Probe has 4″ (100mm) long replaceable needles. The needles are insulated and will only take measurements at the tip enabling the user to make profile measurements. Connects to all Protimeter pin type and ideal for measurements in Exterior Insulation Finishing Systems.
(BLD5060) Heavy duty two pin moisture probe and lead:
Heavy duty two pin moisture probe and lead The Protimeter ‘Heavy Duty Moisture Probe and Lead’ can be used with any Protimeter pin moisture meter and is designed for the measurement of moisture in awkward corners and hard to reach areas.
(BLD5018) Deep Wall Probes – 5″ (127mm)
The Protimeter insulated ‘Deep Wall Probes’ measure moisture at depth in walls and other structures regardless of surface dampness or contamination.
(BLD0529) Hammer Electrode needles for BLD 5000 (10 pack):
Hammer Electrode needles for BLD5000 – pack of 10
(BLD5296) Hammer Electrode needles for BLD 5055 (10 pack):
Hammer Electrode needles for BLD5055 – pack of 10
(BLD5079) Two pin moisture probe and lead:
Fits all Protimeter pin type moisture meters.
(BLD5086) Calcheck device:
Allows the checking of pin function to be verified. Readings between 17 and 19% are normal. Two spare 1″ (22mm) needles are included
(BLD4750C) Hygrostick Pack:
Pack of 5 Hygrometer probes to measure RH and ambient temperature.
(BLD4755-5) Mini Hygrostik with traceable cert 5-pack:
Sensors specifically designed for concrete floor moisture measurement
(BLD5802) Hygrostick/Humistick extension lead:
30″ (76cm) long. Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas.
(BLD5806) Mini Hygrostick/Humistick extension lead:
Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas.
(BLD4650-20) 20 pack adjustable sleeves:
Adjustable sleeves
(BLD4755-EX) Extractor tool:
Extractor Tool
(BLD4902) Humidity Sleeves:
20 pack of Humidity Sleeves for measurement of RH% in concrete slabs (slotted style: 43mm length x 16mm dia.) Requires 5/8″ (16mm) concrete drill.
(BLD4711) Humidity Box:
Allows surface humidity test of %rh on concrete slabs. Complies with B_S_8201/8203(UK).
(BLD5018) Deep Wall Probes – 5″ (127mm):
The Protimeter insulated ‘Deep Wall Probes’ measure moisture at depth in walls and other structures regardless of surface dampness or contamination
(BLD5060) Heavy duty two pin moisture probe and lead:
The Protimeter ‘Heavy Duty Moisture Probe and Lead’ can be used with any Protimeter pin moisture meter and is designed for the measurement of moisture in awkward corners and hard to reach areas.
(BLD5086) Calcheck device (WME):
Allows the checking of pin function to be verified. Readings between 17 and 19% are normal. Two spare 1″ (22mm) needles are included
(BLD5055) Heavy Duty Protimeter Hammer Electrode:
Heavy duty hammer electrobe for measuring sub-surface moisture levels in wood.
(BLD5070) EIFS Probe:
The Protimeter EIFS Probe has 4″ (100mm) long replaceable needles. The needles are insulated and will only take measurements at the tip enabling the user to make profile measurements. Connects to all Protimeter pin type meters and ideal for measurements in Exterior Insulation Finishing Systems.
(POL4750) Hygrostick:
The Hygrostick is a single replacement hygrometer probe for use with the Protimeter MMS and Hygromaster to measure % rh and ambient temperature. Ideal for rh test in concrete slabs and general applications. 30 -100 % rh range.
(BLD4750C) Hygrostick 5 Pack:
By their nature, humidity sensors are relatively fragile and, being an organic sensor, will deteriorate over time and with use. This is 5 Hygrosticks that can be used with MMS and Hygromaster. Traceable certificate available.
(BLD5802) Hygrostick/Humistick extension lead:
30″ (76cm) long. Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas
(BLD5806) Mini Hygrostick/Humistick extension lead:
Allows easier measurement in concrete floors, HVAC ducts and other hard to reach areas.
(BLD4650-20) 20 pack adjustable sleeves:
Adjustable sleeves
(BLD4755-EX) Extractor tool:
Extractor Tool
(BLD4902) Humidity Sleeves:
20 pack of Humidity Sleeves for measurement of rh% in concrete slabs (slotted style: 43mm length x 16mm dia.) Requires 5/8″ (16mm) concrete drill
(BLD4711) Humidity Box:
Allows surface humidity test of %rh on concrete slabs
(GRN6046) Fast Response Temperature Probe 1m length:
The Protimeter Fast Response Probe measures temperature of grain in store, when used in conjunction with the GrainMaster i. The probe is 1 meter in length, and it provides the user rapid assessment throughout the grain store which is essential for ACCS purposes.
(GRN6005) Grinder-Compressor unit:
This unit is supplied with all Protimeter grain moisture meters as standard, but it can also be used with many older models. It is very quick and simple to use and is suitable for a wide range of crops
(GRN6004) Grinder blade & plastic feeder ring:
Replacement components for Grinder-Compressor unit (GRN6005)
Hay And Straw Bale Moisture Meter
(GRN6148) Replacement Bale Probe:
Measurement range: 9% – 40%. 24″(600mm) length
Delmhorst accessories
(1235) 10″ Prod:
Used for testing standard bales. Attaches directly to the connector on top of the meter.
(1986) Bale Sensor:
For continuous monitoring during baling. Comes with 30’ cable to run from the sensor mounted in the bale chamber to the meter in the cab. May be used with any model, but is recommended to use with Model FX-2000. Also available as 1986/40 with 40’ cable for larger balers.
(831) Short pin prod:
For testing hay in the windrow (requires H-4 Handle).
H-4 Handle:
Mounts to the connector on the top of any meter to use the #830 series #831 prods. This arrangement is recommended over the #1235 when testing any high density or larger bales to minimize stress placed on the meter case.
830-2 / 830-3 / 830-4:
Prods for testing standard and high density bales (requires H-4 Handle).
830-2: 10″ Prod – for testing standard and high density bales.
830-3: 18″ Prod – for testing hay in large bales or round bales.
830-4: 36″ Prod – for testing hay in large bales or round bales.
324CAS-0065 Carrying Case:
This carrying case may be purchased as a part of one of our deluxe moisture meter packages, and fits all prods except the 1986 bale sensor, 830-3 prod, and 830-4 prod. Can also be purchased separately.
4-E:
Use with the JL-2000 for demanding applications. Comes with #2497/A-100 contact pins for 5/16” penetration.
H-4 / 830-2:
Electrode handle and 10″ coaxial prod for measuring moisture content in bales.
2-E:
Pin type, maximum penetration 5/16″. Used on curved surfaces such as cardboard and paper tubes especially if of small diameter.
15-E:
Pin type, with two rows of four pins each, maximum penetration 1/8″. Penetration can be adjusted according to stock thickness by means of gauge block.
19-E:
Blade type for measuring of paper on skids. Blades are 5″ long. Longer blades available on special order.
43-E:
Clamp type for testing thin sheet stock. The sample tested is compressed between two smooth discs.
55-E:
Leaf type for measuring moisture content on a moving web or roll. Can be used with a portable unit or for stationary installation.
12-E:
Double roller type for measuring moisture content on a moving web.
HygroNet accessories
Wireless Sensor – Ambient Only
The wireless ZigBee sensor has ambient sensors measuring temperature and humidity.
Features and Benefits:
- ABS Casing rated IP65
- Dimensions diameter 80 x 55mm
- Typical battery life 2 years on routine reporting cycles
Slim Wireless Sensor
The wireless ZigBee sensor has a 5mm diameter combined temperature and humidity probe on a 0.5m flying lead.
Features and Benefits:
- Main sensor measures ambient temperature and humidity plus socket for WME sensor
- ABS Casing rated IP65
- Dimensions diameter 80 x 55mm
- Typical battery life 2 years on routine reporting cycles
PT 100 Wireless Sensor
The wireless ZigBee sensor has a stainless steel PT100 temperature probe on a 1m flying lead.
Features and Benefits:
- ABS Casing rated IP65
- Dimensions diameter 80 x 55mm
- Typical battery life 2 years on routine reporting cycles
High Power Wireless Sensor
The high power wireless ZigBee sensor has an ambient sensors measuring temperature and humidity plus a socket for a WME sensor.
Features and Benefits:
- ABS Casing rated IP65
- Dimensions 121 x 80 x 60mm
- Typical battery life 2 years on routine reporting cycles
WME Sensor
WME Sensor for use with HygroNet and HygroNet SoLo.
Features and Benefits:
- Cable length 1 meter
Inwall Probe (for Hygronet Wireless Sensors)
In wall temperature and humidity replacement probe for HygroNet Wireless Sensors
Features and Benefits:
- External dimensions 40 x 16mm
- Field replaceable
Inwall Probe (for Hygronet Base Station)
In wall temperature and humidity replacement probe for HygroNet base station and HygroNet SoLo
Features and Benefits:
- External dimensions 40 x 16mm
- Field replaceable